PV-Cables PV Wire
10.1002 - 10AWG 2 Conductor Tray Cable
Solar Panel wiring

Price: $.49 / Each

Product Specs

UL Type TC or TC-ER, THHN / THWN-2 Insulation, 600 V, rated 90C wet and dry - RoHS Compliant - Exposed Run (ER) Rated


National :  ICEA S-73-532; UL 1277; UL 83


TC or TC-ER under UL 1277 Electrical Power and Control Cables may be installed in wet or dry locations; in cable trays, raceways and open air; and are suitable for exposure to weather, direct burial Class I, Div. 2 (also Zone 2) and Class II, Div. 2 hazardous locations, as well as Class III, Div. 1 & 2 hazardous locations per NEC.  Cables with three or more conductors are UL listed for exposed runs (ER) when installed in accordance with NEC Article 336.10(7).


Bare, annealed copper conforming to ASTM B3 and Class B compressed stranded copper in accordance to ASTM B8.

Flame-retardant PVC/Nylon type THHN/THWN-2 per UL 83.

Two-conductor cables are supplied in a flat/parallel configuration.  Ground wires are sized as required by UL 1277 (refer to applicable product tables for the standard sizes provided).  Where necessary, a binder tape of synthetic material assembles the core in a tight circular configuration. 


UL listed sunlight and moisture resistant, sequentially marked, black, flame retardant polyvinyl chloride (PVC) material meeting the requirements of UL 1277. A Nylon ripcord is included for ease of jacket removal. Jacket surface is printed with required UL / NEC code information and sequential footage markings.

Conductor Identification: 
Color coded per Method #1-E2 per ICEA S-73-532

Powered by Fortune3