Stäubli EVO-2 Connector Set, 12-10AWG

Stäubli EVO-2 Connector Set, 12-10AWG

$4.00
Skip to product information
Stäubli EVO-2 Connector Set, 12-10AWG

Stäubli EVO-2 Connector Set, 12-10AWG

$4.00

Genuine Stäubli MC4-Evo 2 connector set for 12-10 AWG PV wire. Each set includes one male (-) and one female (+) connector, each with its terminal and housing. MC4-Evo 2 is Stäubli’s next-generation MC4, built on MULTILAM contact technology and approved for 1500V DC systems with higher current ratings and a higher upper temperature limit than the original MC4. It mates with the MC4 family, and the connectors have been evaluated for both USE-2 and PV wire.

What’s included

  • 1 male (-) terminal and housing (32.0089P2000-UR, PV-KST4-EVO 2/6II-UR)
  • 1 female (+) terminal and housing (32.0088P2000-UR, PV-KBT4-EVO 2/6II-UR)

Specifications

  • Brand: Stäubli (Multi-Contact)
  • Models: 32.0089P2000-UR (male) and 32.0088P2000-UR (female)
  • Terminal type: Stamped and formed crimp terminals
  • Wire size: 12-10 AWG (4-6 mm²)
  • Cable outer diameter: 6.4-8.4 mm
  • Rated voltage: 1500V DC
  • Rated current (UL): 39A (12 AWG), 50A (10 AWG)
  • Ambient temperature range: -40°C to +85°C
  • Upper limiting temperature: 115°C
  • Protection when mated: IP68 (1 m, 1 h) / IP65
  • Certifications: UL 6703, IEC 62852, JET, TÜV Rheinland (cTÜVus)

Ideal for

  • 1500V DC utility, commercial, and residential PV systems
  • Building custom leads and extension cables on 12-10 AWG wire
  • Replacing damaged or poorly crimped MC4 or MC4-Evo 2 ends

Download Spec Sheet

What you’ll need: a Stäubli-approved crimp tool, such as the Stäubli MC4 Crimp Tool, which is rated for MC4 and EVO2 terminals and includes the open-crimp die set for these. Use tinned copper conductors. Stäubli says not to mate its connectors with other brands’ connectors, and each terminal can only be crimped once, so a bad crimp means starting over with a new terminal.

Need a different set? See the 12-10 AWG MC4 set or the EVO-2 8 AWG set.

FAQ

What’s in one set?
One male (-) and one female (+) connector, each with terminal and housing. It makes one mating pair.

What’s the difference between MC4-Evo 2 and the original MC4?
MC4-Evo 2 is Stäubli’s newer design. It carries higher current ratings for the same wire size and a higher upper temperature limit (115°C versus 105°C for the original MC4 open-crimp family), and it is approved for 1500V DC under UL 6703 and IEC 62852.

Can I mate it with original MC4 connectors?
Stäubli designs MC4-Evo 2 to mate with the MC4 family, but the connection is then limited to the lower rating of the two. For the best result, use Evo 2 on both sides.

What wire does it fit?
12-10 AWG (4-6 mm²) with a cable outer diameter of 6.4-8.4 mm. Stäubli has evaluated the connectors with USE-2 and PV wire.

Do I need a crimp tool?
Yes. The terminals are crimped, and Stäubli requires an approved tool. Our Stäubli MC4 Crimp Tool includes the open-crimp die set.

Can I use it with other brands’ MC4 connectors?
Stäubli’s instructions say not to. Keep the whole connection Stäubli.

You may also like