Stäubli MC4 Connector Set, for USE-2 wire 12-10AWG

Stäubli MC4 Connector Set, for USE-2 wire 12-10AWG

$4.00
Skip to product information
Stäubli MC4 Connector Set, for USE-2 wire 12-10AWG

Stäubli MC4 Connector Set, for USE-2 wire 12-10AWG

$4.00

Genuine Stäubli MC4 connector set for USE-2 wire, 12-10 AWG. Each set includes one male (-) and one female (+) connector, each with its terminal and housing. Its cable gland is sized for the thinner outer diameter of single-insulated USE-2 conductors, so you get a snug, sealed fit where the standard PV wire housings would be too loose. Built on Stäubli’s MULTILAM contact technology for low, stable contact resistance.

What’s included

  • 1 male (-) terminal and housing (32.0015P0001-UR)
  • 1 female (+) terminal and housing (32.0014P0001-UR)

Specifications

  • Brand: Stäubli (Multi-Contact)
  • Models: 32.0015P0001-UR (male) and 32.0014P0001-UR (female)
  • Terminal type: Stamped and formed crimp terminals
  • Wire size: 12-10 AWG
  • Cable outer diameter: 5-6 mm
  • Rated current: 30A
  • Rated voltage: 1500V DC
  • Temperature range: -40°C to +85°C
  • Protection when mated: IP65 / IP68
  • Certifications: cULus Listed / UL Recognized (UL 6703), TÜV Rheinland, IEC 62852

Ideal for

  • Terminating USE-2 wire in the field
  • Building custom leads on single-insulated 12-10 AWG conductors
  • Replacing damaged or poorly crimped MC4 ends on USE-2 wire

Download Spec Sheet

Check your wire first: this set is sized for a 5-6 mm cable outer diameter. Measure your wire before ordering. For double-insulated PV wire (larger outer diameter), use the Stäubli MC4 Connector Set, 12-10AWG.

What you’ll need: a Stäubli-approved crimp tool, such as the Stäubli MC4 Crimp Tool, which includes the open-crimp die set for these terminals. Use tinned copper conductors. Stäubli says not to mate its connectors with other brands’ connectors, and each terminal can only be crimped once, so a bad crimp means starting over with a new terminal. Protect unmated ends with Male and Female sealing caps.

FAQ

What’s in one set?
One male (-) and one female (+) connector, each with terminal and housing. It makes one mating pair.

What’s different about this set?
The terminals are the same 12-10 AWG stamped and formed type, but the housing’s cable gland is sized for a 5-6 mm cable outer diameter, which fits single-insulated USE-2 wire.

Can I use this set on regular PV wire?
Standard double-insulated PV wire usually has a larger outer diameter, so use the 12-10 AWG set designed for it. Measure your wire against the 5-6 mm range.

Do I need a crimp tool?
Yes. The terminals are crimped, and Stäubli requires an approved tool. Our Stäubli MC4 Crimp Tool includes the open-crimp die set for this set.

Can I use it with other brands’ MC4 connectors?
Stäubli’s instructions say not to. Keep the whole connection Stäubli.

You may also like